listed In - Public Address Systems

HEINRICH Audio PS20TP and PS10TP are are twin-cone, all-weather , full-range music projectors designed for long term reliability and even cover- age in constant-voltage, distributed audio systems.

Versatile in application, the PS series may be used for surface applications indoors or out and for value engineered projects without sacrificing audio quality. The durability of the molded ABS housing is well suited for moist outdoor environments, but its European styling makes it a great choice for indoor track lighting decoration. Mainly considered for music installations, the PS Series is equally effective for voice reproduction in commercial, industrial, and institutional settings. Applications include mounting in Atrium, Metro/Railways, Airport malls, banks, upscale stores and outdoor restaurants. Additionally , they can be used for traditional paging situations where the customer demands quality background music. 

The unit shall be HEINRICH model PS10TP or equal and approved. Assembly shall comprise of a 130mm, polypropylene twin-cone loudspeaker and a factory mounted 10 Watt 100V line transformer. The enclosure shall be constructed of a high impact  ABS with UV inhibitors . The unit will be weather - resistant and fitted with aluminum, epoxy coated fine mesh grille that covers the drive unit. The mounting will be via a hipped, aluminum ‘U’ bracket. Cable entry shall be via a single gland mounted on a removable plate at the rear panel of the loudspeaker. The loudspeaker shall have a wide-angle dispersion of 180°@ 1kHz. The cone shall be a damped, high- compliance type with a smooth extended response over a range of 110Hz ~18kHz. Sensitivity shall be a minimum of 91dB@1 meter, 1watt using test signal bandwidth 100 Hz – 10kHz. The transformer shall be 100V line with 3dB power taps of 10, 5, 2.5, and 1.25 watts to be clearly marked on the assembly. The ‘PS’ version of the PS10TP shall be compliant with BS5839 - Part 8 (Voice Alarm Standard) to include all the above features, with the addition of thermal fuse and ceramic terminals to take 2 x 2.5mm2 cables. A fire-rated cable tail must be fitted for full compliance with BS5839 Part 8. All units to be tested to BS6840 — Part 5.

Connecting Worldwide
May I help you