1800 419 1117 info@heinrichlimited.com

NAP4S (IP/TCP Network Audio System IP-NAS software Series) IP Network Audio system

the NAP4S is a compact four zone IP/TCP network audio system solution, which is integrated four separated network audio adapters  zones at the same time. The NAP4S is a compact four zone IP/TCP network audio system solution, which is integrated four separated network audio adapters into a chassis, each network audio adapter is of difference IP address from other, this difference program could be designated to different zones at the same time. it is used to transmit program from internet to four amplifiers & 4 zone Loudspeakers, so the normal connection way us below: LAN Control port by RJ45 connector to LAN switch, Local four zone aux inputs from four separate sound players, aux output to the zone amplifier line input, the zone amplifier 100V speaker output to each channel input (com & input hot end), the four channel outputs are designed to connect with three wired volume control then to loudspeakers (Com, EMC and Hot).The serial port is used only for write or change the IP address. The redundancy RJ45 port is only conceded for LAN switch backup use or two units cascaded use. The IP network audio adapter is of 19 rack mount design, so it could be installed in anywhere of the non-dedicated network. It is high economy to matching with HEINRICH series analogue or Class-D two ranges four channel power amplifier for a four zone application. this LAN network technology also, allow this amplifier could be install in each floor or local terminal area, this the cable wiring cost could be saved. The biggest advantages of the network audio system are: Super distance audio transmission, simultaneous maximum program task and non-dedicated network wiring.

Specification of NAP4S (IP/TCP Network Audio System IP-NAS software Series) IP Network Audio system

  • 19 ruck mount IP/TCP network audio adapter in 2U height
  • Built-in four zone TCP/IP decoders
  • Heart of IP background music, zone paging & voice alarm system
  • Local aux input for each zone
  • One all zone mic input and One all zone aux input with optional priority setting
  • One communication control port and one redundancy port both by RJ45 type Aux priority input, in green means network program or local aux input.
  • Four reserved serial port for write in and change IP address use only.