1800 419 1117 info@heinrichlimited.com

IPAS-215 IP Network Wall Mount Speaker (2x15W) IP Network Audio system

The IP network Wall Mount Speaker is with TCP/IP protocol, enable to be built up an IP based sound system through a single CAT5 or CAT6 wire. The single CAT5 cable is used for control data, signal data and power supply, by this way, the layout cost will be much decreased compare to analog PA system. The wall mount speaker is designed with 5” two way wall mount speaker with 2X15W class-D amplifier and stereo output, keep good sound quality by hard decoder. The IP speaker kits is designed as an economy IP system solution, include one active speaker + one passive speaker both in 15W RMS , with a low cost to build up the IP network speaker system There is one contact input and one contact output to interactive with third party system. The remote paging microphone FIP-900TM enables to make announcement over individual IP speaker, group speakers over network

Specification of IPAS-215 IP Network Wall Mount Speaker (2x15W) IP Network Audio system

Economy IP speaker system sells in one pair
Strong IP software with timer, BGM, paging, Support DHCP/static IP address
IP PA system with background music, paging system and voice alarm system
Minimum cable connection over existing LAN/WAN/Internet system
Huge system capacity up to 1,200 zones
Support with existing IP switch network system
IP based POE powered 15W 5” two way wall mount speaker
Built-in IP module, 2x15W class-D amplifier and two way speaker
Single network cable for control, signal and power supply
Same IP speakers enable to be several group or zone defined
Different music or voice message simultaneously broadcasted through different IP speakers
Paging prioritization and background music system
IP software adjust speaker volume, Bass, Treble
Closed contact input & Closed contact output with program
DC12V power supply input