listed In - Public Address Systems
Description of IP Network Adapter (Wall Mount Type with 2x10W Amplifier)
The NAP-15 is a best seller model for lP/TCP network audio system solution. it is used to
transmit program from internet to its built-in amplifier then to low impedance loudspeakers.
So the normal connection way as below: Control port by RJ4S connector to LAN switch and
speaker outputs to loudspeakers.
The lP network audio adapter is of wall mount design, it is built-in a 15W amplifier, so it is
usually installed in the terminal room together with a pair low impedance speakers for a small
sized application This LAN network technology also allow this lP network audio adapter with
ampli_er could be installed anywhere of the LAN system, thus the cable wiring cost could be
saved.
The Biggest advantages of the network audio system are: Super distance audio transmission,
simultaneousmaximum program task and non-dedicated network wiring. A 4 ohms loudspeaker
or a pair of 8 ohms loudspeaker could be directly powered by the built-in 15w power amplifier.
it is also designed of local end-user program selection from server by remote control. Local
volume also could be adjusted by remote control. Remote control is also could be used to write
and change the lP Password is needed to access control the equipments to avoid unintentional
error.
The Network audio Adapter Also is designed with a local input, a volume control could be used
to adjust the speaker loudness. Two levels of priority output: Voice evacuation system with
highest priority and local input with secondary priority over program source. However, the
local input and program source priority could be customized.

Features

•    IP network audio adapter built-in 10W+10W amplifier
•    Direct to receive internet audio source and transmit to low impedance loudspeakers.
•    Non-dedicated network system solution.
•    Could be installed anywhere of the LAN network.
•    Economy network audio solution for multiple small sized room applications.
•    With 3.4 inch LCD screen humanized operation interface.
•    Zone definition is done through software, each network audio adapter could be regard as one
        zone, or several audio adapters could be taken as one zone, moreover, several zones could be
        de_ned as group for synchronous operation.
•    Build-in order programmed collect module, it can realize the realtime signal collect function.
•    IR remote control optional, all operations can be done on the remote control.
•    One Aux input and one local microphone input, both with volume control.
•    A remote control over IP address change and write in, volume control and local program
        selection from server.
•    A 4 ohms loudspeaker or a pair of 8 ohms loudspeakers could be directly powered by the
•    built-inampli_er.
•    Voice evacuation system with higher priority and local input with secondary priority.
        Moreover, the local input and program source priority could be customized.

Specification of IP Network Adapter (Wall Mount Type with 2x10W Amplifier)
Connecting Worldwide